What causes a car starter motor to keep spinning after the engine starts? When a car's starter motor rebounds poorly (fails to disengage properly or re-engages), it can cause damage to the motor, the flywheel, or other components. Below is a guide to understanding possible causes, testing methods, and solutions. Possible Causes Faulty Bendix Drive or Overrun Clutch The mechanism responsible for disengaging the starter motor after the engine starts may be worn or stuck. Weak Return Spring The return spring inside the starter motor might lose its tension, causing improper rebound. Sticky Solenoid The solenoid, which engages and disengages the starter gear, might stick in the engaged position due to dirt, corrosion, or mechanical failure. Improper Installation Incorrect mounting of the starter motor can cause alignment issues, leading to poor disengagement. Flywheel Damage Damaged teeth or misalignment of the flywheel can hinder proper engagement and disengagement of the starter gear. Electrical Issues Faulty wiring or a stuck ignition switch can cause the starter to continue operating even after the engine starts. How to Test the Cause Visual Inspection of the Starter Motor Remove the starter motor and check for wear, dirt, or damage to the Bendix drive, solenoid, and gears. Inspect the return spring for signs of weakness or deformation. Flywheel Inspection Inspect the flywheel teeth for chips, wear, or alignment issues through the starter mounting hole. Check the Solenoid Function Use a multimeter to test the solenoid for proper electrical continuity. Manually engage and release the solenoid to check for smooth movement. Test the Electrical System Test the ignition switch and wiring for a constant voltage signal after the engine starts. Use a mechanic's stethoscope to listen for any unusual noises indicating poor rebound. Functional Testing Reinstall the starter motor and run the engine to observe its behavior. Listen for grinding or continuous operation. How to Solve It Replace Faulty Components Replace a worn Bendix drive, weak return spring, or sticky solenoid with new parts. Clean and Lubricate Clean dirt, grease, and corrosion from the starter motor and apply appropriate lubricant to moving parts. Repair or Replace the Flywheel If the flywheel is damaged, repair or replace it to ensure smooth engagement and disengagement. Adjust Installation Realign the starter motor and ensure it is properly mounted according to manufacturer specifications. Fix Electrical Issues Repair or replace faulty wiring, and ensure the ignition switch operates correctly. Replace the Starter Motor (if necessary) If the starter motor is extensively damaged or its internal mechanisms are beyond repair, replace it with a new or refurbished unit. Prevention Tips Regular Maintenance: Periodically inspect and clean the starter motor and flywheel area. Timely Repairs: Address any signs of starter motor or flywheel problems early to prevent further damage. Quality Installation: Ensure professional installation to avoid alignment and operational issues. ==================== 💻 💻 Discover More: https://www.spartlink.com.my https://www.facebook.com/SPARTLINKENT.SB https://www.instagram.com/spartlink_sb Telegram: https://t.me/SPARTLINKENT_SB_C 📲 📲 WhatsApp: https://wa.me/60122187488 🛒🛒 Shopee: https://www.shopee.com.my/spartlink Lazada: https://www.lazada.com.my/shop/spartlink 📌 Address ： Google Map: https://osini.co/SPARTLINK or Waze: https://osini.co/SPARTLINKENT_SB
read more
